Grab your HP printer setup kit. Open it to find different cables the HP printer installation disk, power adapter, and HP printer service manual. Now take note of variant or your printer model. It'll be printed in front or the back of the device. Additionally, make note of the item key if there is any. You must have the dynamic or static Internet protocol address, Subnet Mask, and Gateway info if you wish to establish a printer connection. This information can be obtained by you from the Internet Service Provider.C connect your HP printer utilizing the cable and the power adapter.
Plug one end of the electricity cable securely and operate its end. Operate the cable of the power adapter into the electrical outlet and turn on it. Your HP printer setup kit came do not worry. You and the electrical outlet may connect your printer. Nonetheless, there is a power adapter link preferred than a power link. The printer will boot when turned on. You will see the power lights. It means the printer is ready and on. Press the Power or button on the device if it is not. Now look for the Universal Serial Bus cable which will connect the printer to the computer and keep it handy.
Don't connect it, just keep it beside. Close all of the currently opened programs on the pc screen. When done, insert the HP printer setup disc in the drive of the computer and restart it. Choose to boot from of the CD and follow of the on-screen prompts. One of the computers has rebooted, you should see of the autorun HP printer setup wizard. If you don't see an auto-prompt after waiting for 1-a few minutes, click on the Start menu and browse to My Computer. Look for of the removable CD ROM icon. It could Be under E drive if this is the removable media directory is.
It may be anything that you've chosen as your default location. Double click on the CD, setup.exe icon and after that click the Run button to run the wizard. When asked, enter your HP printer model or create and accept the HP item license agreement. Click Next after each command to continuing. When prompted, connect the Universal Serial Bus cable firmly to the Universal Serial Bus socket of the computer and run its other end in the printer Universal Serial Bus Socket. When connected, the setup wizard will detect of the hardware changes and prompt you, therefore. In case the wizard doesn't detect the printer and show an error message, electricity off the printer and after that power on. The wizard will detect the printer.