Precautions for testing and installation when installing a Stainless Steel Kitchen Sink :
First, the test process is as follows:
1. Drain test: After installing the sink, we will conduct a drainage test to check the effect of the sink installation. First install the filter basket and start the next experiment. When performing the drainage test, fill the sink with water and test both. Filter the drain of the water and overflow holes in the basket. If there is water seepage when draining, please rework immediately to ensure that it will not be used in the future;
2. The edge around the tank: After the drainage test is completed, make sure there is no problem and the sink can be sealed. When using a silicone seal, make sure that the gap between the sink and the table is even and that there is no water seepage.
3. Complete the installation of the sink: After the seal is completed, the installation of the sink will be completed smoothly. The sink is small, but because of the frequent use, each sewer connection is more critical.
Second, stainless steel kitchen sink installation precautions
1. Before installing the faucet, drain the debris from the water pipe completely to prevent debris from entering the faucet, damaging the valve plug and other seals or blocking the water;
2. When installing, the position reserved for the countertop should match the volume of the sink. After placing the table top, it is necessary to install a matching suspension between the groove and the table;
3. As the date of use increases, the aging of the water tank is unavoidable, especially in the case of water leakage, silicone can be applied over a period of time to increase the sealing.
Leanhu Village, Mazhu Town ,Yuyao , Zhejiang , China
Loading
