4 common phenomena in the leakage of Stainless Steel Bathroom Faucet :
1. The faucet is still out of water after the spool is closed
This phenomenon may be caused by the looseness of the pressure cap causing the looseness of the valve core to seal the water. The solution is to remove the handle and the decorative cover, and re-tighten the pressure cap, and there may be a deformation of the rubber ring at the bottom of the valve core. The water cannot be sealed. The solution is to take out the valve plug, check the bottom rubber ring, reset it and reinstall it.
2. Water seeps from around the spool
This phenomenon may be caused by loose or displaced spool. The solution is to remove the spool and reinstall it.
3. Water seeps from the middle of the spool
This phenomenon is the damage of the valve core. The solution is to replace the valve core. If the faucet leaks, replace the valve core, which will definitely increase the maintenance cost.
4. Leakage at the bottom of the tap
This phenomenon is generally caused by the unfilled or deformed O-ring of the inlet pipe. The solution is to unscrew the hose. If the O-ring is not deformed, the O-ring and the inlet pipe are re-assembled. Yes, if the O-ring is found to be deformed, replace the O-ring.
Leanhu Village, Mazhu Town ,Yuyao , Zhejiang , China
information about Stainless Steel Bathroom Faucet : http://www.ukfreeads.ws/view/item-1070544-Stainless-Steel-Bathroom-Faucet-Quality-Is-Uneven.html
Loading
