SVR Global, an Electric Actuated Valve Manufacturer in USA, provides accurate flow control as well as a number of additional benefits. Due to their simple operation style, our electric actuated valves are the safest alternative in isolated and demanding environments.
An electric actuated valve is directly attached to an electric actuator, indicating that the valve is completely automated.
What is an Electric Actuator?
An electric actuator (sometimes known as motorized or rotary ball valves) is a mechanical device that turns electricity into kinetic energy in a single linear or circular motion. It automatically closes the valve to increase the efficiency and complexity of the process.
Electric valve actuator selection criteria
- Torque
- Power
- Valve mounting compatibility
- Temperature
- IP rating
- ATEX requirement
- Fail-safe
- Modulation
- Duty type and duty cycle
Advantages of Electric Actuated Valves:
- Can be installed safely and quickly.
- Can handle practically all fluid types and have a low failure rate.
- Provide a leak-proof service.
Industries that use Electric Actuated Valves:
- Wastewater & Ultra-Pure Water
- Mining
- Chemical
- Textile
- Power Industries
- Boiler Industries
- Pulp & Paper plants
- Oil & Gas
Types of Electric Actuated Valves:
Electric Actuated Ball valve
SVR Global is well known Electric Actuated Ball Valve manufacturer in USA. An electric actuated ball valve is the closed valve. It is used to control the flow of medium or gas through a rotating ball that is connected to the actuator. This valve has a very long lifespan and they provide reliable fixing for the whole life of the valve. An electric actuated ball valve is more dependable and long-lasting than any other valve. They can continue to work admirably even after many years of use and can close securely even after many years of inactivity. These features make them the optimum choice for shutdown and control applications in a variety of sectors. To reduce or increased the pressure and fluid flow in the system, it can also be set to quarter-turn or half-turn settings.
An electric actuated ball valve converts electricity into kinetic energy with the help of an actuator in a rotating motion. Electric actuators are also known as motorized valve actuators. It can control the opening and shut off the electric actuated ball valve. Remote control systems allow responding to commands, making them suitable for controlling systems that are very difficult to access in large regions.
Electric Actuated Butterfly valve
SVR Global is a leading Electric Actuated Butterfly Valve manufacturer in USA. This valve is composed of an electric actuator and a sanitary butterfly valve thats why known as Electric Actuated Butterfly Valve. With the help of the electric actuator, the development of the butterfly valve rises to the next level. The electric actuator drives the valve stem, which results in the 90-degree rotation of the butterfly plate to achieve the opening and closing of the valve.
The energy source for this valve is electric power. This electric power leads to the operation of the valve place to achieve the opening and closing of the valve and connecting or shutting off the fluid. An electric actuator is divided into switch type and regulation type. The switch-type butterfly valve plays the role of switching the flow while the regulated type butterfly valve plays the role of regulating the flow. Regulating type valve can accurately regulate the flow of fluid to one thousand degrees. The main components of the electric actuated butterfly valve are the body, disc, stem, and seal. The fluid can pass through the valve because of the disc there and the disc is joined to the rod in this valve.
Electric Actuated Gate valve
SVR Global is the topmost Electric Actuated Gate Valve manufacturer in USA. It is used to open or close the valve through electric voltage and signal control. This valve may totally shut off or completely allow the flow of fluid. The electric actuated gate valve opened and closed automatically. It is made up of three parts: the body, bonnet, and trim
- The valve adopts self-tightening type pressure sealing structure.
- The valve clack adopts a double gate with a universal joint structure in the middle of the valve.
- The sealing face of the valve click and valve seat was made of cobalt, chromium, and tungsten cemented carbide.
An Electric actuated gate valve is used to handle a wide range of pressure, temperature, and caliber. Especially it is suitable for medium and large diameter pipelines.
The Electric actuated gate valve is made up of main three parts: the body, bonnet, actuator, and trim. Mainly there are two parts connected to each other, the upper part is the electric actuator and the lower part is the gate valve. By connecting those two parts together they can control the opening and closing of the gate valve to work to achieve the on-off of the pipeline medium. Electric energy is used in the working of an electric actuated gate valve and the valve stem is connected to drive the valve plate to open and close or to move up and down, so that valve can control the switch of the pipeline medium.
Electric Actuated Globe valve
Description of Electric Actuator:
Torque: 3 9 nm
Operating pressure: 8 Bar
Port Connection: NPT1.4
Mounting Base: ISO5211
Temperature: 20°C - +80°C
Description of Electric Actuated Valves:
Being a well-known Electric Actuated Valve Manufacturer in USA, SVR Global provides valves that have the following features-
Materials: CF3M, CF8, WCB, and Stainless steel(SS304, SS316, CF8M, SS316L, SS904L).
Class: 150 to 2500; PN6 to PN450
Size:1/2 to 80
End Connections: Buttweld, Lug, Flanged, Socketweld, Threaded, Wafer
Operation: Electric Actuator.
Visit us to know more about various valves provided by SVR Global - https://svrglobal.net/products/electric-actuated-valve/
Loading
